Loading ...
Loading ...
Loading ...
VIVOTEK
User's Manual - 11
2. Open the dome cover by pressing the release button. You may squeeze the opposite edge of
the dome cover if the dome cover does not come off easily. Then, follow the steps below to in-
stall the camera to either a ceiling or a wall.
Hardware Installation - FE9191
Opening Dome Cover
Release
button
Network Camera
Model No: XXXXXX
MAC: 0002D14BAD55
Pat. 6,930,709
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Made in Taiwan
1. Jot down the camera’s MAC address for later reference. It is especially important if you install
multiple cameras at one site.
It is not recommended to use an Ethernet cable with a strain relief
boot. If it does, remove the boot.
Loading ...
Loading ...
Loading ...