1. Home
  2. Hikvision
  3. Hikvision DS-2TD4228-7\/S2 User Manual
  4. Page 99

Hikvision DS-2TD4228-7\/S2 DS-2TD4228-7/S2 Thermal and Optical Bi-spectrum Network Speed Dome

Hikvision DS-2TD4228-7/S2 User Manual - Page 99

For DS-2TD4228-7\/S2.

PDF File Manual, 117 pages, Read Online | Download pdf file

DS-2TD4228-7\/S2 photo
Loading ...
Loading ...
Loading ...
3.
Set the PPPoE parameters.
Dynamic IP
Aer successful dial-up, the dynamic IP address of the WAN is displayed.
User Name
User name for dial-up network access.
Password
Password for dial-up network access.
Conrm
Input your dial-up password again.
4.
Click Save.
5.
Access the device.
By Browsers Enter the WAN dynamic IP address in the browser address bar to access
the device.
By Client Soware Add the WAN dynamic IP address to the client soware. Refer to the
client manual for details.
Note
The obtained IP address is dynamically assigned via PPPoE, so the IP address always changes
aer restarng the camera. To solve the inconvenience of the dynamic IP, you need to get a
domain name from the DDNS provider (e.g., DynDns.com). Refer to Access to Device via Domain
Name for detail informaon.
12.8 Accessing via Mobile Client
Hik-Connect is an applicaon for mobile devices. Using the App, you can view live image, receive
alarm
nocaon and so on.
Note
Hik-Connect service should be supported by the camera.
12.8.1 Enable Hik-Connect Service on Camera
Hik-Connect service should be enabled on your camera before using the service.
You can enable the service through SADP
soware or Web browser.
Enable Hik-Connect Service via Web Browser
Follow the following steps to enable Hik-Connect Service via Web Browser.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
84
Loading ...
Loading ...
Loading ...