Loading ...
Loading ...
Loading ...
175
uuOperating the Switches Around the Steering WheeluWipers and Washers
Controls
The rear wiper and washer can be used when
the power mode is in ON.
■
Wiper switch (OFF, INT, ON)
Change the wiper switch setting according to
the amount of rain.
■
Washer ( )
Sprays on the rear window while you rotate
the switch to this position. Hold it to activate
the rear wiper and to spray the washer. Once
released, the washer spray will stop and the
rear wiper will return to its selected switch
setting after a few sweeps.
■
Operating in reverse
When you put the transmission to
(R with the windshield wiper activated, the rear
wiper operates automatically as follows even if its switch is off.
■
Rear Wiper/Washer
1Wipers and Washers
If the wipers stop operating due to an obstacle such as
the buildup of snow, park the vehicle in a safe place.
Rotate the wiper switch to OFF, and set the power
mode to ACCESSORY or VEHICLE OFF, then remove
the obstacle.
The wiper motor may stop motor operation
temporarily to prevent an overload.
Wiper operation will return to normal within a few
minutes.
ON: Continuous wipe
OFF
INT: Intermittent
Washer
Front Wiper PositionRear Wiper Operation
INT (Intermittent) Intermittent
LO (Low speed wipe)
HI (High speed wipe)
Continuous
25 HR-V HDMC-313V06200.book 175 ページ ２０２４年２月１日 木曜日 午後３時３０分
Loading ...
Loading ...
Loading ...