Loading ...
Loading ...
Loading ...
period.
(3) Any warranted part that is scheduled for replacement
as required maintenance in the written instructions
must be warranted for the period of time prior to the
part fails prior to the rst scheduled replacement,
the part must be repaired or replaced by Amerisun
according to Subsection (4) below. Any such part
repaired or replaced under warranty must be
warranted for the remainder of the period prior to
(4) Repair or replacement of any warranted part under
the warranty provisions must be performed at no
charge to the owner at a warranty station.
(5) Notwithstanding the provisions of Subsection (4)
above, warranty services or repairs must be provided
at distribution centers that are franchised to service
the subject engine/equipment.
(6) The owner must not be charged for diagnostic labor
that leads to the determination that a warranted part
is in fact defective, provided that such diagnostic
work is performed at a warranty station.
(7) Amerisun is liable for damages to other engine/
equipment components proximately caused by a
failure under warranty of any warranted part.
(8) Throughout the emissions control system's warranty
period set out in subsection (b)(2), Amerisun must
maintain a supply of warranted parts sucient to
meet the expected demand for such parts and must
obtain additional parts if that supply is exhausted.
(9) Manufacturer-approved replacement parts that do
not increase the exhaust or evaporative emissions of
the engine or emissions control system must be used
in the performance of any warranty maintenance
or repairs and must be provided without charge to
the owner. Such use will not r
educe the warranty
obligations of Amerisun.
the Air Resources Board may not be used. The use of
grounds for disallowing a warranty claim. Amerisun
will not be liable to warrant failures of warranted
parts caused by the use of a non-exempted add-on
(11) Amerisun issuing the warranty shall provide any
documents that describe that warranty procedures
(d) Emission Warranty Parts List for Exhaust
(1) Fuel Metering System
(i) Carburetor and internal parts (and/or pressure
regulator or fuel injection system).
(ii) Air/fuel ratio feedback and control system.
(iii) Cold start enrichment system.
(2) Air Induction System
(i) Controlled hot air intake system.
(ii) Intake manifold.
(3) Ignition System
(i) Spark Plugs.
(ii) Magneto or electronic ignition system.
(iii) Spark advance/retard system.
(4) Exhaust Gas Recirculation (EGR) System
(i) EGR valve body, and carburetor spacer if applicable.
(ii) EGR rate feedback and control system.
(5) Air Injection System
(i) Air pump or pulse valve.
(iii) Distribution manifold.
(6) Catalyst or Thermal Reactor System
(i) Catalytic converter.
(ii) Thermal reactor.
(iii) Exhaust manifold.
(7) Particulate Controls
(i) Traps, lters, precipitators, and any other device
used to capture particulate emissions.
(8) Miscellaneous Items Used in Above Systems
(i) Electronic controls.
(ii) Vacuum, temperature, and time sensitive valves
and switches.
(iii) Hoses, belts, connectors, and assemblies.
(e) Emission Warranty Parts List for Evap
(1) Fuel Tank
(2) Fuel Cap
(3) Fuel Lines (for liquid fuel and fuel vapors)
(4) Fuel Line Fittings
(5) Clamps*
(6) Pressure Relief Valves*
(7) Control Valves*
(8) Control Solenoids*
(9) Electronic Controls*
(10) Vacuum Control Diaphragms*
(11) Control Cables*
(12) Control Linkages*
(13) Purge Valves*
(14) Gaskets*
(15) Liquid/Vapor Separator
(16) Carbon Canister
(17) Canister Mounting Br
ackets
(18) Carburetor Purge Port Connector
*Note: As they relate to the evaporative emission control
system.
equipment written instructions for the maintenance and
use of the engine/equipment by the owner.
Loading ...
Loading ...
Loading ...