Loading ...
Loading ...
Loading ...
AXIS P3363–V
Events
Events
The Axis product can be configure d to perform actions when di ffe rent e ven ts occur, for example, start a record ing wh e n motion is
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rul e triggers and conditions include:
• Applications — use installed a pplications to trigger the r u le, see
Applications, on page 31
.
• Detectors
- Audio Detection — trigger the rule w hen audio is detected, see
Audio Detection, on page 30
.
- Day/Night Mode — trigger the rule w hen the product switches b etw een day mode (IR cut filter on) and night
mode (IR cut filter off). This can for example be used to control an external infrared (IR) light connected
to an output port.
- Motion Detection — trigger the rule when motion is detected , see
Motion Detection, on page 28
.
- Tampering — tr igge r the rule wh en tampering is detected, see
Camera Tampering, on page 28
.
• Hardware
- Network — trigger the rule if network connection is lost or restored . This can for example be used to start
recording to the SD card.
- Temperature — trigger the rule if the t em pe ra ture falls outside o r inside the operating range of the product. This
canforexamplebeusedtosendmaintenancenotifications.
• Input Signal
- Digital Input Port — trigger the rule when a n I/O port receives a signal from a connected device, see
I/O
Ports, on page 47
.
- Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see
Controls on the
Live View Page, on page 9
. This can for example be used to va
lidate actions during pro duct installation
and configuration.
• PTZ
- Moving — trigger the rule when the camera v iew moves due to a PTZ operation. This c an for example be used
as an additi onal condition to prevent an action rule triggered by motion detection to record video while the
camera view moves due to a
PTZ operation.
- Preset Reached —tr
igger the rule when the camera stops at a preset position. This can be for example be used
with the Send Images action to upload images from the preset position.
• Storage
- Available — trigger the rule when the storage device is unm ounted or removed. This can for example be
used to send maintenance notifications.
- Full — trigger the rule when the storag e device is full. Under norma l operation, the olde st r ecordings will be
overwritten to prevent the storage device from becom ing full.
- Locked — trigger the rule if the storage device is locked (write pro tected).
• System
- System Initializing — trigger the rule when the p roduct is being started. This can for example be used to s end a
notification when the product restarts.
• Time
32
Loading ...
Loading ...
Loading ...