Loading ...
Loading ...
Loading ...
RSE300, RSE600
Users Manual
6
Download Firmware
Download the latest version of the firmware to the Product to use with the SmartView.
1. Connect the PC to the ethernet jack.
2. On the PC, open SmartView software.
3. Connect the RJ45 connector end of the ethernet cable to the ethernet jack on the PC.
4. Connect the M12 connector end of the ethernet cable to the Product.
SmartView software recognizes the connection with the Imager and appears on the SmartView
software toolbar menu.
5. On the PC, select Yes if prompted to download a firmware update file onto the PC.
The Imager restarts and completes the firmware update.
Enable the Radio
In countries with laws and regulations that permit wireless communications, wireless communication protocols
are available to expand the capabilities of the Imager. All Imagers ship from the factory with the radios disabled.
To enable the radio:
2. On the website:
a. Select a language from the drop down box.
b. Enter your information and the serial number of the Imager. The serial number is case sensitive.
c. Click Submit.
If the radio is authorized in your country, an authorization code appears on the web page.
Note
If the radio is not yet authorized in your country, Fluke will contact you when the radio is authorized for
use in your country.
3. In SmartView:
a. Type in the authorization code from the website and select Enter. (The authorization code is not case
sensitive.)
A message appears in SmartView that shows the wireless communication is enabled.
If a message appears that says the authorization code is invalid:
• Make sure you entered the correct serial number from the Imager into the website.
• Make sure you entered the correct authorization code from the website into SmartView.
b. Select Ok.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...