Loading ...
Loading ...
Loading ...
27
Connections
Power and Steering Wheel Control (SWC) Wiring
WARNING
See the section "Installation Warnings". (P.5)
IMPORTANT NOTE
Unused input/output wires need to be insulated
with tape, heat shrink, or crimp connectors.
Never use wire nuts.
Always replace the faulty fuse with the same
type and rating (15A).
Illumination input wire (Orange) must be
connected to the parking light for night
detection and auto dimming in screen and
panel button lights.
Reverse Input wire (Purple/white) must
be connected to the reverse light wire for
automatic rear camera trigger when the gear is
changed to reverse.
* Power output is max. 500mA, 12V. It is
recommended to use a relay if additional power
is required.
** Consult a professional installer for a correct
SWC adapter for your specic vehicle.
Front View
10 9 8 7 6 5 4 3 2 1
20 19 18 17 16 15 14 13 12 11
SUB2SUB1
FL
RL RR
R-IN
V-IN
FR L-IN
RADIO
15
15A ATO Fuse
Rear Cam Power Output (Red/white)
To rear camera for power supply *
ACC Power Input (Red)
To ignition key switch (+12V)
To vehicle’s metal frame/car chassis
To positive car battery terminal (+12V)
Front Cam Power Output (Red/violet)
SWC Input (3.5 mm)
Illumination Input (Orange)
Ground (Black)
Constant Power (Yellow)
Reverse Input (Purple/white)
Antenna Output (Blue)
Remote Output (Blue/white)
To front camera for power supply *
To a third-part steering wheel control adapter (not
included) **
To vehicle's parking light
To reverse light for rear camera trigger
To car antenna (not included) for power control *
To an amplier (not included) for power control *
Red
White
20
18
17
16
15
14
12
11
9
19
10
Loading ...
Loading ...
Loading ...