Loading ...
Loading ...
Loading ...
52
DRYER CONTROLS AND SETTINGS
Cycle options
Chose desired options. See Cycle Selection
Chart.
perfect steam
TM
(on select models) The
perfect steam
TM
option injects steam into
the clothing prior to cool down to reduce
wrinkling, ironing and static cling.
Dryness level (dry level)
To set or change the dryness level, press
the dry level button to scroll to the desired
setting.
The dryness levels include high, normal, low,
and damp.
Occasionally a load may seem too damp
or over-dried at the end of the cycle. Select
high to increase drying time for similar
loads in the future. Select low to decrease
drying time for similar loads.
Select damp for items you wish to partially
dry before hanging or ironing.
Drying time (dry time)
Manually select or change the drying time
for a time dry cycle (on select models) by
pressing the dry time button to scroll though
the available options. Time dry options
include 30, 45, 60 and 75 minutes (dependent
on model).
All actual or predicted dry times will count
down on the LED display.
NOTE
To change a cycle option once the cycle
has begun, press the start/pause button,
make the new selection and press start/
pause again.
dry boost
This option increases the drying
effectiveness for heavier fabrics or bulky
loads by increasing the drying temperature
by less than 20°F (>1°C). (Varies based on
cycle selection).
leaf icon
This icon will appear on the console when
the dryer is using energy efficient settings.
These settings use less heat and longer
cycle times to dry. The dryer will always
default to the energy efficient Normal cycle
with the leaf icon displayed.
wrinkle release
The wrinkle release option helps prevent
wrinkles and tangling by tumbling the dry
load without heat for 5 minutes out of every
10 minutes. The 5 minutes on and 5 minutes
off is repeated for a total 45 minutes. A chime
will sound after each tumble as a reminder to
remove the dried load.
extended tumble
Select the extended tumble option if the
dried load might not be removed promptly
at the end of the cycle. The dried load will
tumble continuously without heat for 30
minutes. A chime will sound periodically to
remind you to remove the dried load.
delay time
Use delay time/delay to delay the start of
the drying cycle to a time convenient to your
schedule or during off-peak energy hours.
The start of any cycle can be delayed for
NOTE
It is not recommended to use fabric softener
sheets with steam cycles or steam options
as it may cause staining on clothes.
NOTE
When extended tumble and wrinkle
release options are both selected the
amount of time the load will tumble
without heat will increase to a period of
up to 75 minutes.
high
Recommended for most cotton fabrics.
normal
Recommended for wrinkle free, easy care,
lightweight fabrics and bulky loads.
low (on select models)
Recommended for delicate fabrics.
eco dry (no heat)
This setting should only be used with a time
dry cycle to dry items containing feathers,
down, foam rubber, plastics or rubber-like
materials; to refresh clothing, stuffed animal,
pillows or blankets; and to dust draperies.
To protect your fabrics, not all options are
available with every cycle. If an option is not
available for a cycle, the indicator will not light.
Loading ...
Loading ...
Loading ...