Loading ...
Loading ...
Loading ...
2N TELEKOMUNIKACE a.s., www.2n.cz 45/56
The green LED light goes on whenever a valid PIN code in entered via the keypad or a
valid RFID card is applied. Subsequently, the set switch is activated. A valid
authentication is indicated by an acoustic signal if set so.
The red LED light goes on whenever an invalid PIN code is entered via the keypad or
an invalid RFID card is applied. Subsequently, the set switch is not activated. An
invalid authentication is indicated by an acoustic signal if set so.
Tip
Set the LED backlight level in the Hardware/Backlight section, refer to
of the Configuration Manual for more details.5.3.4 Backlight
Loading ...
Loading ...
Loading ...