Loading ...
Loading ...
Loading ...
1. Position discharge plate (A) as shown.
2. Insert M8 x 20 carriage bolt (B) through the mower deck and into
the hole in the discharge plate.
3. Install M8 lock nut on bolt (B). Do not tighten yet.
4. Insert M8 shoulder bolt (C) through the discharge plate and into the
hole in the mower deck.
5. Install M8 lock nut on bolt (C).
6. Tighten nuts.
Specication
M8 Nut—Torque. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 N·m
(15 lb·ft)
SB31882,00003E0-19-02JUN20
Installing MulchControl Deector (If Equipped)
CAUTION: Avoid injury! Machine component or attachment
is heavy. Use a safe lifting device or get an assistant to help
lift, install, or remove component or attachment.
NOTE: For ease of installation, place mower deck in the vertical
position.
APY24928—UN—26MAY20
MX101515—UN—03JUN20
1. Assemble kit gate (A) and bafe (C) together as shown and insert
the pin (B) in the slots.
APY24929—UN—11DEC19
2. Install right deector assembly (D) to the mower deck using M8
shoulder bolts (F) and M8 nuts.
3. Ensure the pin (E) is in the correct slot and that the gate door can
open and close.
4. Tighten lock nuts.
Specication
M8 Lock Nut—Torque. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 N·m
(15 lb·ft)
APY24930—UN—13DEC19
5. Install left deector assembly (I) to the mower deck as shown using
M8 shoulder bolts (H) and M8 nuts.
6. On the top side of deck, install M8 lock nut on shoulder bolt (G).
7. Tighten lock nuts.
Specication
M8 Lock Nut—Torque. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 N·m
(15 lb·ft)
SB31882,00003E1-19-03JUN20
Installing MulchControl Handle (If Equipped)
CAUTION: Avoid injury! Machine component or attachment
is heavy. Use a safe lifting device or get an assistant to help
lift, install, or remove component or attachment.
Service Mower
42
Loading ...
Loading ...
Loading ...