Loading ...
Loading ...
Loading ...
18" Monolith Wine
* Noise output – according to EN 60704-3.
** Please contact your Liebherr Authorized Dealer for door reversal.
MW 1801
A
Cabinet depth frameless installation style = 25" (635 mm)
Cabinet depth inset installation style = 25" (635 mm) +
panel thickness.
B
At this point the power cord exits from the appliance
rear. 3/4" (19 mm) from the left and 5" (127 mm) from
the floor. Free length of the power cord is 98" (2.5 m).
C
The appliance has a recess in this area for cable and
waterline laying. 1" (25 mm) in depth and 5 1/2" (140 mm)
in height over the whole width of the appliance.
D
This surface is visible when the appliance door is open.
Designed finish is required.
E
The anti-tipping bracket is positioned at the base of
the appliance and must be secured to the wall or to the
floor, please refer to the installation manual for more
information.
18" recess
Inset installation style
H = 79 7/8" (2029 mm) / h = 58 7/8" (1495 mm)
W = 17 3/4" (451 mm) / w = 11" (280 mm)
Frameless installation style
H = 80" (2032 mm) Add overlapping
dimension to the panel on the top.
W = 18" (457 mm) Add overlapping
dimension to the panel on both sides.
Panel thickness: Min. 5/8" (16 mm)* / Max. 1" (25.4 mm)
Panel and handle weight: Max. 52 lbs. (24 kg)
4"
(102 mm)
18"
(457 mm)
A
B
13 3
2 /16" - 4
/16
"
(72 - 106 mm)
3"
(76 mm)
3"
(76 mm)
DD
84"
(2134 mm)
C
E
18"
(457 mm)
A
B
3"
(76 mm)
3"
(76 mm)
DD
84"
(2134 mm)
C
E
* If a shaker style panel is used, which is thinner than the minum panel thickness, shorter screws than those supplied in the accessory pack must be used.
C
(2126 mm)
3
83 /4"
(65 mm)
9
2 /16"
(96 mm)
3
3 /4"
(610 mm)
24"
(450 mm)
3
17 /4"
Inset
A = 8 1/4" (210 mm)
B = 1/2" (12.5 mm)
C = 19 7/8" (505 mm)
Frameless
A = 8 1/2" (216 mm)
B = 1/2" (12.5 mm)
C = 20 3/8" (517 mm)
Dimension A = without
mounted door handle
W
Hh
w
~
8.8 ft (2400 mm)
~
6.5 ft (2000 mm)
42 43
Product Dimensions
Individual Toe Kick
Cut out Dimensions
Door Panel Dimensions
and dimensions of free length for power
Continuous Toe Kick
Available Accessories
· Stainless steel panel
· Monolith brushed aluminum square handle
· Monolith stainless steel round handle
· Monolith brushed aluminum soft-edge handle
· Stainless steel Toe Kick
· Reverse door kit
See pages 56–59 for available accessories for
single units and Side-by-Side combinations.
↑
↓
18″
17
3
/
4" (450 mm)
150
38 *
8.2 (232)
75
9
9
aluminum / beech
yes
InfinitySwipe
+41 °F to +68 °F (+5 °C to +20 °C)
2
visual and acoustic
InfinityLight
acoustic
yes
yes
insulated glass door
left, reversible **
83 3/4" / 17 3/4" / 24"
212.6 / 45 / 61
84" / 18" / 25"
213.4 / 45.7 / 63.5
295.4 (134)
115/60
Energy consumption (kWh / y)
Sound rating dB(A)
Total capacity cu.ft. (l)
Max. No. of Bordeaux bottles (0.75l)
Number of shelves
Shelves on telescopic rails
Shelf material
InfinityBoard
Electronic control
Temperature range °F (°C)
Temperature zones
Temperature alarm
Interior light
Door alarm
Safety thermostat
Activated charcoal filter
Door type
Door hinges
Product dimensions
in inch (H / W / D)
in cm (H / W / D)
Cut out dimensions
in inch (H / W / D)
in cm (H / W / D)
Net weight lbs. (kg)
Voltage V / Hz
with right door hingesThis unit is also available as MW 1800:
IMPORTANT!
Stated minimum height dimensions
include when the leveled feet are fully
inserted.
Height can be increased by a maximum of
3/4" (19 mm) by turning the adjustable feet.
When the appliance is fitted in the recess,
the appliance must be raised by turning the
adjustable feet so that the appliance top
has contact with the anti-tipping bracket.
This results in a 4" (102 mm) Toe Kick height.
Width will increase by 1/4" (6.5 mm) when
mounting strips are installed.
Loading ...
Loading ...
Loading ...