Loading ...
Loading ...
Loading ...
Note: while the detector is disarmed, power o and power on will make the detector enter the walk test mode.
6
Set up with App
5
Formatting
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
While the detector is disarmed, the detector will enter the walk test mode (within 3 minutes after being enrolled).
Trigger the detector within the detection range.
If the LED indicator turns blue, the installation position is properly. If the LED indicator is still o, adjust the position of the detector.
within 3 min
after the enrollment
5
Hold the tamper switch for 8 s and power the device on at the same time. The red LED ashes 3 times when the formatting
operation is completed.
Function
Zone Type
Stay Arm Bypass
Chime Slide to green to enable the chime.
Select the zone type of the detector.
Description
You can view the device status including temperature, signal intensity, battery level, lid, arming/disarming, etc.,on the device page.
Tap the button to enter the settings page.
Slide to green to bypass the zone from
stay arming.
Loading ...
Loading ...