Loading ...
Loading ...
Loading ...
13
Operation
Installation Check List Before Operation
1. Have all packing materials and tape been removed from the interior and exterior of the
Wine Cooler?
2. Have the installation instructions been followed, including connecting the machine to
electricity? And has proper grounding been installed for the Wine Cooler?
3. Has the machine been leveled?
4. Is the Wine Cooler in a site where the ambient temperature is between 50° F and 95° F
all year round?
5. Is there a clearance of at least 1- 2” at the rear, 1/4” at the top, and 1/4” at the sides for
proper air circulation?
Using the Temperature Control Panel
This wine cooler has two cooling zones. Each zone has a temperature range from 40°F to 65°F.
The control panel of this wine cooler has two displays that show the set temperature. The Left
Zone display shows the temperature in the left section, and the Right Zone display shows the
temperature in the right section
• Left Button : Press the button on the control panel to adjust the temperature in the left
zone. The button will change the temperature by one degree increments. Once you see the
desired temperature, stop pressing the button.
• Right Button : Press the button on the control panel to adjust the temperature in the right
zone. The button will change the temperature by one degree increments. Once you see the
desired temperature, stop pressing the button.
• Run Light: When lit, the unit is in cooling mode
• Light Button : Press the button to turn the inner light on or off.
• Power Button : Turns the unit on and off (press and hold this button for approximately 3
seconds).
• The Celsius or Fahrenheit light will be lit depending on which temperature type is being
displayed. To switch between C and F. press and hold both buttons ( / ) simultaneously
for approximately 3 seconds. A beep will occur and the indicator light will illuminate next to
desired temperature setting.
Loading ...
Loading ...
Loading ...