Loading ...
Loading ...
Loading ...
Stopping
1.Remove foot from travel pedal.
2.Depress brake pedal.
Emergency Stopping
1.Remove foot from travel pedal.
2.Depress brake pedal.
3.Turn key switch to stop (O) position. Do not release brake pedal
until all moving parts have stopped.
4.If possible, lock the park brake.
SR99263,00002FF-19-01JUL20
Using The Reverse Implement Option (RIO)
CAUTION: Avoid injury! Children or bystanders may be
injured by runover and rotating blades. Before traveling
forward or rearward:
● Carefully check the area around the machine.
● Disengage the mower before backing up.
NOTE: Backing up while the mower is engaged is strongly
discouraged. The Reverse Implement Option should be used
only when operating another attachment or when the operator
deems it necessary to reposition the machine with the mower
engaged.
1. Stop forward travel.
2. Look behind the machine to be sure there are no bystanders.
APY36159—UN—10JUL20
3. Push and hold in the reverse implement switch (A) while
depressing reverse pedal slightly.
NOTE: If the engine and mower stop while repositioning the machine,
return the attachment engagement lever/switch to the o
position. Start engine and engage mower. Begin again with Step
2.
4. Release the reverse implement switch (A) and reposition the
machine as the machine begins to move rearward.
5. Resume forward travel. The mower should continue operating.
6. Repeat procedure to position the machine again.
SR99263,00002EB-19-01JUL20
Using Cruise Control (If Equipped)
CAUTION: Avoid injury! Do not use cruise control when
going down hills. Machine speed will increase. Operate
machine in a large, open area to learn how the cruise control
works.
Use cruise control when you want to maintain travel speed without
having to hold the forward travel pedal down. Cruise control operates
only for forward travel.
Engage Cruise Control
1. Push forward pedal down until you reach desired travel speed.
2. Pull cruise control lever up and release forward pedal to lock the
cruise control.
Disengage Cruise Control
● Depress brake pedal, tap on forward pedal or push cruise control
lever down to the o position.
SR99263,00002EC-19-01JUL20
Engaging and Disengaging Mower
NOTE: Put attachment lift lever in transport position to transport
machine or when parking machine.
1. Start engine and run at half speed for a couple of minutes to warm
up.
2. Lower mower deck to desired cutting height position.
NOTE: Throttle lever should be at full throttle position before engaging
mower to avoid stalling engine.
3. Push throttle lever up to the full throttle position.
4. Engage mower.
● On models with electric attachment engagement switch: Pull up
switch.
● On models with mechanical attachment engagement lever:
Push lever forward.
NOTE: The mower and engine stops as the reverse foot pedal is
depressed.
5. Disengage mower blades before moving in reverse or stopping
engine.
● Machines with mechanical attachment engagement lever: Pull
lever back.
● Machines with electric attachment engagement switch: Push
down switch.
SR99263,0000338-19-12MAY20
Using Wash Port to Clean Mower Deck
NOTE: Follow this procedure after each use to prevent buildup and
remove corrosive lawn chemicals.
1. Park machine safely. (See Parking Safely in the Safety section).
Operating
24
Loading ...
Loading ...
Loading ...