Loading ...
Loading ...
Loading ...
Laser Distance Meter
Button Functions
13
Compass (424D)
The compass feature lets you know the view or direction
as you make measurements. This is useful indoors to set
the building plans in the correct direction. It is also useful
to know the correct direction when you calculate the
efficiency for a solar panel.
Tips:
• Make sure that the endpiece is folded in.
• When you use the compass feature, the Meter shows
the calibration message. See Compass Calibration for
more information.
• Compass arrows blink on the display if the Meter is
tilted >20 ° end to end or >10 ° side to side.
• When you turn on the compass, the Meter shows the
calibration message. See Manual Calibration for more
information.
Push
:
• 1x = Arrow points in north direction
• 2 seconds = Arrow points in direction of Laser beam
and display shows the direction in degrees and an
alpha symbol.
W Caution
To prevent incorrect direction readouts, do
not use near magnets and magnetic devices.
Compass Calibration
Automatic Calibration
The compass sensor continuously collects and saves
new calibration values in 60-second intervals.
Manual Calibration
When you turn on the compass, the Meter shows the
calibration message:
1. For no, push
. The compass uses old data that
can be inaccurate.
2. For yes, push
.
To continue with the calibration:
3. Rotate the Meter 180 ° around the Z-axis. See
Figure 8.
4. Rotate the Meter 180 ° around the X-axis.
5. Rotate the Meter 180 ° around the Y-axis.
The Meter counts from 1 to 12 during calibration.
shows on the display when the calibration
is complete.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...