Loading ...
Loading ...
Loading ...
Basic settings en
35
Basic setting Display text Selection Description
Remote Start rc1 rc0 - rc2 Activate or deactivate
→"Remote Start ",
Page36.
The following settings are
possible:
¡ With the setting "rc0", the
function is permanently
deactivated.
¡ With the setting "rc1", the
function can be selected
via the button.
→"Activating Remote
Start ", Page36
¡ With the setting "rc2", the
function is permanently
activated.
This basic setting is not
available until after you have
connected the device with
the HomeConnect app.
→"HomeConnect ",
Page36
Cleaning nozzle FC0
1
FC0 - FC1 Activate "FC1" or deactivate
"FC0" the cleaning nozzle for
the filter system.
Factory setting rE Start with
YES
Confirm with
Restore changed settings to
the factory settings.
The settings for initial start-
up must be configured.
1
Factory setting (may vary according to model)
15.2 Changing basic settings
Tip:Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
HomeConnect app.
→"HomeConnect ", Page36
1. Open the appliance door.
2. Press .
3. To open the basic settings, press
for 3 seconds.
a The display shows Hxx.
a The display shows .
4. Press repeatedly until
the display shows the required set-
ting.
5. Press repeatedly until the dis-
play shows the right value.
You can change several settings.
6. To save the settings, press
for 3 seconds.
7. Close the appliance door.
Loading ...
Loading ...
Loading ...