Loading ...
Loading ...
Loading ...
11
CARE AND MAINTENANCE
The unit should be cleaned on a regular basis. (See: “HOW TO
CLEAN”)
It is necessary to have an adequate ventilation space around
the unit in order to attain proper performance, dissipation of
heat, maintain efficiency, and low power consumption. Clearance
of minimum 2 inches should be maintained at the rear and sides
of the unit. And especially do not obstruct the front hot air
outlet frame. (See: “HOW TO INSTALL”)
Do not modify the power cord under any circumstance to
allow the unit to be plugged into a non-grounded outlet. To avoid
heat damage to the power cord, please ensure that it does not
come in proximity or in direct contact with the compressor of the
unit.
Please avoid installing the unit in a location where the
appliance will come in contact with water or moisture to
minimize rusting of metal parts.
The unit should not be installed near any heat source or in a
location where it will come in direct contact with the sunlight.
The components, if need to be replaced, should be replaced
with similar components, and should be replaced by the
manufacturer or its service agent or a similarly qualified person
in order to avoid a hazard and to minimize the risk of possible
ignition and also to decrease the cooling performance due to
incorrect parts or improper service.
Loading ...
Loading ...
Loading ...