Loading ...
Loading ...
Loading ...
REGENERATION METHOD
1. Before first time use. If the indicator window of the DRY UNIT displays “Green
(Wet)” beads, place the DRY UNIT on the BLOWER BASE and plug-in the
BLOWER BASE into an outlet located in a well ventilated area. Turn BLOWER
BASE on and let it run for approximately 2 hours to dry the DRY UNIT out.
2. When the DRY UNIT is dry and ready for use it will display “Orange (Dry)”
beads. When indicator shows “Orange (Dry)” beads, the DRY UNIT can be
placed where needed to absorb moisture.
3. Check the indicator window on the DRY UNIT every 2-3 weeks or when
needed. When the DRY UNIT indicator window is displaying “Green (Wet)”
beads, simply place the DRY UNIT properly onto the BLOWER BASE and plug-
in the BLOWER BASE into an outlet located in a well ventilated area. Turn
BLOWER BASE on and let it run for approximately 2 hours to dry the DRY UNIT
out.
4. When the indicator window displays “Orange (Dry)” beads, then the drying
procedure is complete and the DRY UNIT is ready for use again.
When fully absorbed,
the indicator displays
green color.
Place the DRY UNIT
onto the BLOWER BASE
properly.
Plug-in 2-3 hours
(The LED will turn on).
When the unit is dry
the indicator will turn
orange.
Loading ...
Loading ...