Loading ...
Loading ...
Loading ...
Resoluon
Priority
The resoluon stays the same as the set value on Video page, and the bitrate
will be adjusted automacally. Go to Conguraon → Video/Audio → Video ,
set the Max. Bitrate before you enable smooth streaming funcon. In this
mode, the framerate will be adjusted to the maximum value automacally.
Frame Rate
Priority
The image is sll smooth even under the poor network, while the image
quality may be not good.
Error
Correcon
The resoluon and bitrate stay the same as the set values on Video page. The
mode is used to correct the data error during transmission to ensure the
image quality. You can set the Error Correcon Proporon within range of
0-100.
When the proporon is 0, the data error will be corrected by data
retransmission. When the proporon is higher than 0, the error data will be
corrected via redundant data that is added to the stream and data
retransmission. The higher the value is, the more redundant date will be
generated, the more data error would be corrected, but the larger bandwidth
would be required. When the proporon is 100, the redundant data will be as
large as the original data, and the bandwidth is twice required.
Note
Be sure the bandwidth is sucient in the Error Correcon mode.
4.
Save the sengs.
2.4 Video and Audio
This part introduces the conguraon of video and audio related parameters.
2.4.1 Video Sengs
This part introduces the sengs of video parameters, such as, stream type, video encoding, and
resoluon.
Go to seng page: Conguraon → Video/Audio → Video .
Stream Type
For device supports more than one stream, you can specify parameters for each stream type.
Main Stream
The stream stands for the best stream performance the device supports. It usually oers the
best resoluon and frame rate the device can do. But high resoluon and frame rate usually
means larger storage space and higher bandwidth requirements in transmission.
Network Camera User Manual
17
Loading ...
Loading ...
Loading ...