Zephyr ZLCE42CS User Manual

Loading ...

MODELS MUA006A • MUA008A • MUA010A

Page 5

INSTALL THE DAMPER

OUTSIDE AIR

TO CENTRAL SYSTEM

RETURN AIR OR INTERIOR

WALL REGISTER

DAMPER FLAP (Install in

vertical position shown.)

AIR FLOW AIR FLOW

SET SCREW

Installthedamperasshown.Makesuredamperflapisinaverti-

cal position when closed and power is off. The set screw can be

used to adjust the damper opening - thereby balancing the inside

and outside air pressure when the range hood exhausts at high

speed.

PRESSURE SWITCH

OPERATION

The pressure switch is designed to operate when the static

pressureincreasesto0.05”Psormore.Itmaynotoperateatlow

speeds since the pressure is below this limit.

MULTIPLE DAMPERS

Morethanonedampermayberequiredtobalancethesystem.

If more than oneis requireduse (1)MUA006A,MUA008A,or

MUA010A and then use the 54060012 (6”), 54060013 (8”), or

54060014(10”)dampersasadditionaldampers.

INSTALLATION OF

PRESSURE SWITCH AND

PROBE

For the probe & pressure switch to work effectively the roof or

wall cap must have a spring loaded damper.

Loading ...

Zephyr ZLCE42CS Core Series Luce 42 Inch Wall Mount Convertible Hood with 600 CFM, LED Lights, ACT Airflow Control Technology, UL Certification, ICON Touch Controls, Aluminum Mesh Filters, LumiLight LED Lighting, Low-Profile Body, Dual-Level Lighting