Loading ...
Loading ...
Loading ...
15
2.3.4 Adjusting the Sun Shield
The environmental IR series are designed with capability to operate under rugged environments and thus will possibly be
subject to influences from sunlight or rain. Sun shield is therefore coated on the camera to prevent damage from those outside
effects. Refer to the figure below to adjust the sun shield.
1. Loosen the two screws on the shield hood.
2. Move the sun shield forward or backward to adjust till the desired position.
NOTE: Be sure to adjust the sun shield in accordance with the lens coverage in case of shadow problems occurring. To
avoid housing damage, DO NOT adjust the sun shield position excessively.
FIGURE 2-7: ADJUSTING THE SUN SHIELD
2.3.5 Positioning the Camera
Retaining Ring for Pan Adjustment (A): Loosen the locking screw by T10 torx wrench and rotate the retaining ring (A)
to adjust the camera horizontally for applying to a variety of applications.
Bracket Axis for Tilt Adjustment (B): Loosen the locking screw by T10 torx wrench and tilt the bracket axis (B) to adjust
the camera vertically for applying to varied applications.
Adjustable Ring for 360°Rotation (C): Loosen the locking screw by T10 torx wrench and rotate the camera body (C) to
adjust the camera for applying to varied applications.
NOTE: Limitation for 3 axes position: Pan range: ±360°, Tilt range: 0°~ 90°, Rotation range: ±360°.
NOTE: After adjustments, make sure to tighten each part by T10 torx wrench to prevent camera from moving.
1
2
Loading ...
Loading ...
Loading ...