IO丿
COST
USER'S MANUAL
CHAISE LOUNGE
HW64414
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMION. PLEASE READ AND KEEP FOR FUTURE REFERENCE
Please
g
ive us a chance to make it ri
g
ht and do better!
Contact our friendly customer service department r help first
Replacements for missing or damaged parts will be shipped ASAP!
FLOOR AREA
2MX2M
ASSEMBLED BY 2 ADULTS
COST
Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail
US: ..m
UK: .u.m
Before You Start
多r石扣
心 Read each step carefully before starting. It is very important to ensure each step llowed in
correct order, otheise assembly diiculties may occur.
心
Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all
parts are included.
�Work in a spacious area, preferably on a carpet close to where the unit will be used.
心
Keep the handtools close at hand. Do not use power tools to assemble your furniture
They may scratch or damage the parts.
02
COST
Board Idencaon
Not actual size
l
7
l
，
The Extension Le Leg x 1
The Extension Right Leg x 1
邕
J
屑
，
Le Leg x 1
Right Leg x 1
Seat x 1
Seat Base x 1
1
Cross Bar x 2
昙
Back x 1
i
诩
Cross Bar x 1
它
Wheel x 2
03
Board Idencaon
Not actual size
04
cos嘈
COST
Hardware List
Actual size
、
肛
M6
x
1
5mm
＠ 丿
BOLT
l畸圈
M6
x4
0
mm
@ I
x
1
0
BOLT
M6
I
x
4
2
l
j
STEEL WASHER
＼
［
l
05
、
M6
x
35mm
二
BOLT
＠
5mm
三
PLASTIC WASHER
匠
仆
®
I
x
1
ALLEN WRENCH
COST
STEP 1
Aach the Seat (E)to the extension right leg(B) by
inserng bolts (M) with steel washers (O).
Repeat step for the other side Extension Le Leg (A).
IMPORTANT:Do not ghten completely unl
assembly is completed.
E
E
B
06
COSTWAY
STEP 2
Aach the cross bar(H&l)to the extension leg
(A&B) by inserting bolts (K) with steel washers (O).
07
COST
STEP3
Aach the wheel(」) to the leg (C)by bolts (K) with
steel washers (0).
Repeat step for the other side leg (D).
c
08
The arrow in the figure shows the direction in
which the component needs to be installed.
COSTWAY
STEP 5
Aach the back (F)to the leg(C&D)by inserting bolts
(M) with steel washers (O),plastic washers(N).
D
G
10
COST
STEP6
Aach the cross bar (I) to the leg (C&D) by inserting
bolts (K) with steel washers (0).
11
Repeat this step to connect
STEPS
Tighten all the bolts using the allen wrench and
turn the chaise to the upright posion.
Your chaise is now ready for use, so relax & enjoy!
13
cos嘈
Maximum Loads
I
盂��n�己芯�=��
;
;
;
���竺��;型�g!:�7n�二
loads
tha
n
14
_
COSTWAY
,HO> OA,V UV,
MO_,V
