Loading ...
Loading ...
Loading ...
49-5000544 Rev. 6 13
5. Install Main Window Panel and
Extension Panels
NOTE: Measure the window opening and use the
extension panels as referenced on page 11 to fit your
window.
1. Open the window and place the window kit
assembly into the window.
NOTE: The window assembly is designed to
accommodate either a double hung or sliding
window.
2. Adjust the extension panel(s) to the width or height
of the window as shown.
3. Depending on the number of extension panels
used, turn the knobs to secure the extension
panel(s) to the main panel. Install from the back.
NOTE: There are many window types on the market
today. Use the foam strips and brackets (provided) to
secure the extension panels that will fit the window
opening.
Double Hung Window
Sliding Window
Installation Instructions
INSTALLATION INSTRUCTIONS
5. Install Main Window Panel and
Extension Panels (cont)
For vinyl windows only.
Skip to step 6 for wood windows.
Place the two top window brackets and two bottom
window brackets where they will best support the
extension panels. Use pointed screws to attach top
bracket to the support panels.
5. Apply the top foam strip (provided) across the
top of the window panel assembly, and then
apply the bottom foam strip (provided) across the
bottom front edge of the window panel assembly,
as shown.
Use only for vinyl
A
B
A
B
Before Assembly
Attach with pointed screw(2).
After Assembly
A
B
C
D
E
Typical Vinyl Window Installation
Loading ...
Loading ...
Loading ...