Loading ...
Loading ...
Loading ...
ENGLISH
WWW.STIEBEL-ELTRON-USA.COM MINI
™
-E SERIES TANKLESS ELECTRIC WATER HEATERS | 15
TROUBLESHOOTING
Problem Cause Remedy
The required
temperature is not
being reached.
The maximum tempera-
ture set inside the appli-
ance is too low.
Have your qualified install-
er adjust the maximum
temperature.
The appliance is operating
beyond its output limit.
Reduce the flow rate.
If you cannot remedy the fault, notify your qualified contractor. To
facilitate and speed up your request, provide the serial number from
the type plate (000000-0000-000000).
Mini-E
Nr.: 000000-0000-000000
LED indicators
26_02_05_0082_
321
1 Illuminates red in case of a fault
2 Illuminates yellow during heating operation or flashes yellow
when demand is exceeding capacity
3 Flashes green if the main control board is receiving power
Loading ...
Loading ...
Loading ...