Loading ...
Loading ...
Loading ...
Preparing the Meter for Operation
Connecting to Line Power 2
2-7
Connecting to Line Power
XW Warning
To avoid shock hazard, connect the factory supplied three-
conductor line power cord to a properly grounded power outlet.
Do not use a two-conductor adapter or extension cord, as this
will break the protective ground connection. If a two-conductor
power cord must be used, a protective grounding wire must be
connected between the ground terminal and earth ground
before connecting the power cord or operating the Meter.
1. Verify that the line voltage is set to the correct setting.
2. Verify that the correct fuse for the line voltage is installed.
3. Connect the power cord to a properly grounded three-prong outlet. See Figure 2-
3 for line-power cord types available from Fluke. Refer to Table 2-2 for
descriptions of the line-power cords.
LC-1 LC-2 LC-3 LC-4
LC-5 LC-6 LC-7
alh03.eps
Figure 2-3. Line-Power Cord Types Available from Fluke
Table 2-2. Line-Power Cord Types Available from Fluke
Type Voltage / Current Fluke Model Number
North America 120 V / 15 A LC-1
North America 240 V / 15 A LC-2
Universal Euro 220 V / 16 A LC-3
United Kingdom 240 V / 13 A LC-4
Switzerland 220 V / 10 A LC-5
Australia 240 V / 10 A LC-6
South Africa 240 V / 5 A LC-7
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...