Loading ...
Loading ...
Loading ...
INSTALLATION MANUAL
INSTALLATION
10
5 ] Remove 2 screws from top of hood (see illustration below). Keep the screws for further use.
RECIRCULATION
COVER PLATE
SCREWS
6 ] Remove Electrical Power Cable Knockout from top (vertical wiring) or back (horizontal wiring)
of hood. Install an appropriate strain relief, 1/2” diameter (not included).
NON-DUCTED INSTALLATION ONLY
7 ] Remove 3 screws retaining the recirculation cover plate (shaded part in illustration below)
to the hood. Discard this plate with its screws.
ELECTRICAL
POWER CABLE
KNOCKOUT
2 SCREWS
Loading ...
Loading ...
Loading ...