Loading ...
Loading ...
Loading ...
12
Troubleshooting
ELECTRIC GRILL DOES NOT TURN ON
SYMPTOM
• Heating element does not heat when following the instructions in the ‘Operation’ section of this
Owner's Manual.
CAUSE SOLUTION
The temperature controller may not be properly
inserted into the housing.
Remove and reinstall temperature controller.
Always plug the temperature controller into the
grill
before plugging power cable into the socket.
There is a problem with the power flowing from the
socket. The circuit breaker may have tripped to cause
a loss of power during use.
Identify other electrical devices that also lost
power. Unplug these devices while using your grill.
Check if dierent electrical outlets are available.
Refer to "Important Safegaurds" if extension cords
are needed.
If your circuit breaker continues to trip during use,
consult a qualified electrician.
The current limiting circuit that is built-in to the
temperature controller may have interrupted the
power to the grill.
If the temperature status indicator light is not on, unplug
the power cable from the socket in order to ‘reset’ the
current limiting circuit
. Wait 30 seconds, then plug the
power cable back into the socket.
m WARNING
m Do not attempt to make any repair
to electric components or structural
components without contacting
Weber-Stephen Products LLC,
Customer Services Department.
DON'T FORGET TO REGISTER
REPLACEMENT
PARTS
To obtain replacement parts,
contact the local retailer in your area
or log onto weber.com.
CALL
CUSTOMER
SERVICE
If you are still experiencing any
problems, contact the CustomerService
Representative in your area using the
contact information that can be
found on weber.com.
Loading ...
Loading ...
Loading ...