HEAVY-DUTY ALLOY WHEEL PAINTING/REPAIR
STAND - SINGLE WHEEL CAPACITY
MODEL NO: MK72
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
I
MPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
Only use on firm, level, unobstructed surfaces which are capable of supporting the stand and wheel rims.
DO NOT overload.
Always load the stand carefully to ensure maximum balance and stability.
Apply the brakes before commencing work.
DO NOT stand/ride on the stand, or allow others to do so.
Replace or repair damaged parts. Use only recommended parts. Unauthorised parts may be dangerous and will invalidate the warranty.
WARNING! Failure to comply with these instructions may result in loss of load, damage to the stand or other property and/or personal
injury.
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions
and situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this
product, but must be applied by the operator.
2. INTRODUCTION
Fully adjustable supporting bars and cones for optimum height. Cone is angled for ease of use. Holds wheel up to 22”. Supplied with
100mm PU wheels for moving the stand round the workshop or spray booth. Rotates the wheels on the cones so that each wheel can
be painted completely.
3. SPECIFICATION
Model No.: ...........................................................MK72
Max. Load Capacity: ............................................. 50kg
Size (W x D x H): ..........................800 x 800 x 1000mm
4. ASSEMBLY
Assemble stand according to parts diagram.
MK72 Issue 2 (H,3,F) 10/08/23
Original Language Version
© Jack Sealey Limited
Refer to
instruction
manual
Wear
protective
gloves
Wear
protective
clothing
Wear
protective
footwear
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
