Loading ...
Loading ...
Loading ...
23
CONNECTOR
The bodypack uses a mini 3-pin XLR connector for all microphones. Other brands of
microphones can be used with the Audix Performance Series Wireless system; however, it
will be necessary to rewire the microphone connector to a mini 3-pin XLR (f). In this case,
note the following pin configuration:
PERFORMANCE TIPS
The best position for a wireless receiver is within line of sight whenever possible.
For more complex set ups, consider extending the antenna range by using the
ANTDA4161 active antennas.
High quality batteries will provide the best results for handheld and bodypack
transmitters. Rechargeable batteries typically have a shorter usage span. It is not possible
to use two sets of transmitters simultaneously on the same frequency. It will not work.
Each time a scan and sync is performed, the transmitter will always be tuned to the
current frequency on the receiver. When using dual systems, always scan and sync each
channel independently from one another.
SETTING UP MULTIPLE SYSTEMS
It is fairly straightforward to get 16 channels of wireless to work simultaneously within
one frequency band (32 megs). This is done using a standard Scan and Sync method. The
systems will stay in the same Group until the group maxes out its channel selection. At this
point, it may be necessary to manually select a different Group for additional
pre-coordinated channels.
Pin 3: Signal
Pin 2: Bias (voltage)
Pin 1: Shield
Loading ...
Loading ...
Loading ...