Loading ...
Loading ...
4.Power distribution: upper left 240V/1200W, lower left 240V/1500W,
upper right 240V/2000W, lower right 240V/1200W. (+ / - 10%)
5. Firepower adjustment: in heating mode, push the regulator, the digital gear from
1 to 9 is normal heating gear, and the P gear is rapid heating. After 3 minutes, it will
return to the 9 gear. Turn to 0 to stop heating.
6. Shutdown: In heating mode, hold down (hold down for two seconds) to exit
heating and return to shutdown state.
7. Child lock: long press the child lock key for 2-3 seconds to drop a sound to
lock or unlock, locked successfully child lock digital display Lo, shutdown or standby
with heating state can operate child lock.
After successfully locking, do not operate
any health except child lock.
Locked successfully as shown in figure:
8. Timing: This function is to set the shutdown time. In heating mode, press the
timing button to enter the preset timing. The default time is 00 minutes.
Switch adjustment time (progressive 1 minute, 99 minutes at most), the
adjustment is completed to stop the operation, digital flashing several times after
entering the steady setting success. Continuously press the timing button to set the
time of multiple furnace areas. After the setting is completed, the small dot flashes at
the lower right corner of the display digital number in the furnace area. The time
display in different furnace areas automatically switches to about 5 seconds, with the
small dot as a mark.
As shown in the picture, timing left upper furnace area: 99 minutes
3
4
9. Panel high temperature warning: there is still residual temperature on the furnace
panel after use, warning display H, be careful of scalding hands.
10. Product dimensions and precautions:
10.1. Product dimensions 770*520*82 (30.3*20.47*3.34 inches)
If not including the foot of the fuselage thickness is 65MM/2.55 inches
10.2. Opening roar size 760*500*150mm (29.92*19.68*5.9 inches)
11. The corresponding temperature of each section of fire
(set the numerical value for the program), the measured data obtained by
different working ring mirrors will have deviation.
Range 1--2--3--4--5--6--7--8--9--P ten stages Corresponding degrees
Celsius 60-80-100-120-140-160-210-240-270 degrees C ten segments Corresponding
to Fahrenheit 140-176-212-248-284-320-356-410-464-518F ten segments
Note: if the product is used on the table, because the bottom will produce temperature during the use process,
please use high temperature resistant flame retardant material for the table such as marble....... And so on.
Loading ...
Loading ...
Loading ...