Dji POWER 1000 User Manual

Loading ...

DJI Power 1000/500 User Manual

3. Connect the device to an AC power outlet if updating the rmware of DJI Power 1000 with a

rated voltage of 100 V or 120 V. Skip this step if updating the rmware of other power station

models.

4. Launch DJI Assistant 2, select the product, and click the rmware update button on the left

side.

5. Select the rmware version, carefully read the prompts in DJI Assistant 2, and click Upgrade.

The rmware will be downloaded and uploaded to the device automatically.

6. The firmware will be updated automatically, and the display screen will show the update

progress. Wait for processing to complete. The device will restart automatically after the

rmware update is done.

• DO NOT power o the device or disconnect the device from the computer during a

rmware update.

• DO NOT disconnect the device from the AC power outlet when updating the rmware

of DJI Power 1000 with a rated voltage of 100 V or 120 V.

• If the rmware update fails, the display screen will show UPGD FAIL. Disconnect the

device from the computer and the AC power outlet, press and hold the power button

for ve seconds to power o the device, and try again.

Troubleshooting

If there is any system warning on the display screen, click the link below or scan the QR code to

learn about the warning details and the corresponding troubleshooting. Contact DJI support if a

problem persists.

https://s.dji.com/DJI-Power

Maintenance

• If the power station needs to be stored for an extended period, it is recommended to

discharge the power station to 60%. Storing with a high power level will shorten the battery

cell life. Storing with a low power level may lead to over-discharge.

• The power station should be stored at a storage temperature of -10° to 45° C (14° to 113° F),

and in a cool and dry environment without direct sunlight. DO NOT place the power station in

water or where water may leak.

Loading ...

Dji POWER 1000