Loading ...
Loading ...
Loading ...
Set Face Detecon
It helps to detect the face in the detecon region. If a face is detected, the device triggers the
linkage acons.
Steps
1.
Go to Conguraon → Event → Smart Event → Face Detecon .
2.
Check Enable Face Detecon.
3.
Oponal: Highlight to display the face in the image.
1) Check Enable Dynamic Analysis For Face Detecon.
2) Go to Conguraon → Local , set Rules to Enable.
4.
Set Sensivity. The lower the sensivity is, the prole of the face or unclear face is more dicult
to detect.
5.
Set the arming schedule and linkage methods. For the informaon about arming schedule
sengs, see Set Arming Schedule . For the informaon about linkage methods, see Linkage
Method Sengs .
6.
Click Save.
Set Video Loss
This funcon can detect the video signal loss in me and trigger the linkage acon.
Steps
1.
Go to Conguraon → Event → Basic Event → Video Loss .
2.
Check Enable.
3.
Refer to Set Arming Schedule for seng scheduled me. Refer to Linkage Method Sengs for
seng linkage method.
4.
Click Save.
Set Intrusion Detecon
It is used to detect objects entering and loitering in a predened virtual region. If it occurs, the
device can take linkage acons.
Before You Start
●
For certain device models, you need to enable the smart event funcon on VCA Resource page
rst.
●
For the device supporng HEOP, go to VCA → APP to import and enable Smart Event.
Steps
1.
Go to VCA → Smart Event → Intrusion Detecon . For certain device models, you should go to
Conguraon → Event → Smart Event → Intrusion Detecon .
2.
Check Enable.
Network Camera User Manual
48
Loading ...
Loading ...
Loading ...