Loading ...
Loading ...
Loading ...
Part 1 – Introduction
11
2
Remove the top cover.
3
Insert a SD memory card into the SD memory card
slot with the 'micro SD' print facing upward.
micro
SD
Push the SD memory card until it disengages from
the slot, and then pull it out.
Installation
• Check the wall or ceiling to see if it needs to be
reinforced. The camera may fall o if the wall or
ceiling is not strong enough to support its weight.
• Install the camera in a shaded area. If the camera
is installed in direct sunlight, it may be aected
adversely.
Use the provided guide pattern to check the distance
between the screw holes if necessary.
1
After you insert the SD memory card in the camera,
secure the body on a wall or ceiling using the screws
and anchors that came with the camera.
If you install the camera on a wall, check the
direction of the camera body to prevent image
from being turned upside down.
The end of the arrow
should be at the top.
Loading ...
Loading ...
Loading ...