Loading ...
Loading ...
Loading ...
DS-K1A8503 Series Fingerprint Time Attendance Terminal User Manual
67
device according to your actual needs.
Note
This function should be supported by the device.
Disable Attendance Mode
Disable the attendance mode and the system will not display the attendance status on the device
initial page.
Before You Start
Add at least one person, and set the person's authentication mode. For details, see Person
Management.
Steps
1. Click Access Control → Advanced Function → More Parameters to enter the More Parameters
page.
2. Select a device from the left panel.
3. Click Attendance Status.
4. Set the attendance mode as Disable.
5. Click Save.
Result
The attendance status function is disabled, and you will not view or configure the attendance
status on the device initial page.
Set Manual Attendance
Set the attendance mode as manual, and you can select a status manually when you take
attendance on the device.
Before You Start
Add at least one person, and set the person's authentication mode. For details, see Person
Management.
Steps
1. Click Access Control → Advanced Function → More Parameters to enter the More Parameters
page.
2. Select a device from the left panel.
3. Click Attendance Status.
4. Set the attendance mode as Manual.
5. Make sure Attendance Status Required is enabled.
Note
By default, Attendance Status Required is enabled.
Loading ...
Loading ...
Loading ...