Loading ...
Loading ...
Loading ...
en Childproof lock
14
Childproof lock
15 Childproof lock
The hob is equipped with a childproof lock. You can
use this to prevent children from switching on the hob.
15.1 Switching on Childproof lock
Requirement:The hob must be switched off.
▶
Touch and hold for 4 seconds.
a lights up for 10seconds.
a The hob is locked
15.2 Deactivating the childproof lock
1.
To switch on the hob, touch .
2.
Touch and hold for 4 seconds.
a The lock is released.
15.3 Automatic childproof lock
You can also activate the childproof lock automatically
every time the hob is switched off.
You can find out how to switch the function on and off
in the "Basic settings" section →Page14.
Pause
16 Pause
You can use the function to pause and resume active
cooking processes for up to 10 minutes without chan-
ging the settings you have selected.
You can switch the function on to clean the control
panel, for example.
16.1 Activating the Pause function
▶
Press .
a lights up in the cooking zone displays.
a All active cooking processes are stopped. The set-
tings are retained.
a The function is activated.
16.2 Deactivating the Pause function
▶
Touch .
a The function is switched off. The cooking processes
continue.
Note:After approximately 10 minutes, the cooking
zone automatically switches off.
Individual safety switch-off
17 Individual safety switch-off
Activate the safety function if one cooking zone is in
operation for an extended period and you do not
change any settings. The cooking zone displays
and switches itself off.
The time depends on the selected power level.
Power level Time
1.0 - 1.5 10 hours
2.0 - 3.5 5hours
4.0 - 5.0 4 hours
5.5 - 6.5 3 hours
7.0 - 7.5 2 hours
8.0 - 9.0 1hour
Press any button to switch on the cooking zone.
Basic settings
18 Basic settings
You can configure the basic settings for your appliance to meet your needs.
18.1 Overview of the basic settings
Display Setting Value
Childproof lock
→"Childproof lock", Page14
- Manual.
1
- Automatic.
- Function switched off.
Audible signals - The confirmation signal, the fault signal and the sig-
nal for incorrect use are deactivated.
- The fault signal is activated.
- The confirmation signal and the signal for incorrect
use are activated.
- All signal tones are switched on
1
.
1
Factory setting
Loading ...
Loading ...
Loading ...