Loading ...
Loading ...
Loading ...
10 - EN
Description/Use
Portalter not supplied.
If the manual grinding operating
time exceeds the safety time set
(90 seconds), the motor stops
automatically.
During the grinding phase, do
not rotate the knob (7) from one
program to another and do not
move the grain selection lever (8).
If a ner level of grinding than
that currently used is to be set, it
is highly recommended to remove
the grinder and clean it, removing
any residual beans, before
proceeding with a new grinding
operation. See the CLEANING
AND MAINTENANCE section to
remove the grinder.
A bean blocking system allows the
container (2) to be lifted from the
motor base (1) in a safe manner,
preventing the beans from escaping.
The coffee grinder has an auto-
switch-off button (stand-by) if it is
not used after 90 seconds.
Press the START/STOP button to
re-activate the product.
GRINDING TIMES (Fig. E-F)
The functions envision pre-set supply settings
of ground coffee. However, depending on
personal taste, the pre-set amount of ground
coffee can be increased or decreased, thus
customizing the different functions.
Customize the amount of grinding
for espresso coffee.
• Make sure that the grinding indicator (12)
is positioned at an adequate grinding level
for espresso coffee (FINE).
• Turn the knob (7) to “
1
”.
• Press the START/STOP button (6) to start
grinding and hold it down for the desired
time; the lock nut (14) ashes during the
programming phase.
• On releasing the button, grinding stops, the
lock-nut stops ashing and the new setting
is memorized.
By modifying the amount of single
espresso coffee ground, the amount
of double espresso coffee is also
modied automatically.
Customizing the amount of ground
coffee for American/French press
coffee.
• Make sure that the grinding indicator (12) is
positioned at an adequate grinding level for
Americano/French Press coffee (MEDIUM/
COARSE).
• Turn the knob (7) to “2”.
• Press the START/STOP button (6) to start
grinding and hold it down for the desired
time; the lock nut (14) ashes during the
programming phase.
• On releasing the button, grinding stops, the
lock-nut stops ashing and the new setting
is saved.
Loading ...
Loading ...