Loading ...
Loading ...
Loading ...
13 14sharkclean.com sharkclean.com
ENGLISH
IMPORTANT: Clean the dust screen
inside the dust cup as required.
NOTE: Empty dust cup when debris
reaches the MAX fill line.
IMPORTANT: If more cleaning is
needed, rinse filters with water only
and let them air-dry completely.
MAINTAINING YOUR VACUUM
EMPTYING THE DUST CUP
1 Press the Wand Release button on
the top of the wand to disconnect it
from the handheld vacuum.
2 Position the handheld vacuum so the
dust cup is over a trash bin and press
the “Empty” button on the front.
The bottom lid will open, allowing
the debris to fall out.
3 Once dust cup is empty, close the
bottom lid.
RECOMMENDED FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
XFFV300
Clean once a month.
Post-Motor Filter
XFFV300
Clean once a year.
CLEANING THE FILTERS
1 Pre-Motor (foam and felt):
Access the foam and felt filters by lifting
the latch on the top of the handheld
vacuum. Remove and rinse the filters
with water. Tap loose dirt off filters
between washes as needed. Once
completely dry, insert the felt filter first,
then place the foam filter on top of it.
Foam
Felt
2 Post-Motor:
Lift o the post-motor filter cover
below the handle of the handheld
vacuum. Remove the filter, rinse it
with water only, and let it air-dry
completely. Replace the filter, then
close the cover, pressing it until it
clicks into place.
Empty
Loading ...
Loading ...
Loading ...