Rockville RPM109 User Guide

Loading ...

19. Main control: controls the effectiveness of the digital effects main channel.

20. USB/SD/BT digital controller: Play/Pause, Stop, Repeat, Rewind, Fast Forward. LCD screen alternates (every 3 seconds) between

displaying track playing time and total time.

21. Mode control: Push to switch between modes (USB/SD/Bluetooth/FM Radio)

22. Foot Switch input: connect a foot switch via this 1/4" jack to BYPASS or ENGAGE the built-in effects.

23. FX out: sends a stereo line level signal to an external effects processor. This signal can be RETURNED on any other LINE INPUT on the RPM109.

24. Line Out: the L/R ¼˝ provide unbalanced (TS) output. The ¼˝ MON jack provides and unbalanced (TS) output signal.

25. Power-on LED: indicates unit power status.

26. Phantom Power switch and LED indicator: switch on phantom power when connecting condenser mics to Ch1 – Ch10.

27. Master Monitor level control and LED meter: controls the monitor level, while the LED meter displays the level of the signal being sent

from the Monitor (MON) jack (see item 24).

28. Monitor graphic equalizer: 7 band EQ allows you to adjust the frequency response (±12dB) of the Monitor bus signal.

29. Main Control and LED meter: controls the level of the Main bus. The LED meter displays the level of the signal being sent from the L/R

¼˝ Main outputs.

30. Main graphic equalizer: 7 band eq allows you to adjust the frequency response (±12dB) of the Main bus signal.

31. SD/USB inputs. Please note: The RPM109 will not recognize USB drives formatted in the NTFS format; only the FAT or FAT32 formats.

32. Power Amplier control: LEDs indicate Monitor or Mains mode.

Bridge/Main: sends the main mix to mains via Bridged Output on the rear panel. Please note that in this mode the monitors are disabled.

Main/Main: sends the main mix to mains only via Speaker Outputs on the rear panel.

Main/Monitor: sends the main mix to mains via Speaker Outputs on the rear panel and the monitor mix to monitors via Monitor

Outputs on the front panel.

33. Power switch

34. IEC AC Power socket

35. User serviceable fuse

36. Dual vent fan cooling system

37. Monitor output: speakON jack with an impedance of 4 ohms. Also serves as Right channel output when in MAIN mode.38. Bridged

output: speakON jack with an impedance of 8 ohms.

39. Monitor output: speakON jack with an impedance of 4 ohms. Also serves as Left channel output when in MAIN mode.

WARNING: Never use balanced and unbalanced connections simultaneously.

WARNING: Do not operate below rated minimum impedance.

Functions (continued)

Loading ...

Rockville RPM109 12 Channel 4800w Powered Mixer, 7 Band EQ, Effects, USB, 48V