Worksafe 9331/3 Valved Cup Mask FFP1

DISPOSABLE FACE MASKS

MODEL NO’S: 9329/3 & /10 (PACKS OF 3 & 10), 9309/3 & /10

9331/3 & /10, 9304/3 & /10, 9305/3 & /10, 9332/3 & /10, 9333/3 & /10

9334/3 & /10

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

instructions, and properly maintained, give you years of trouble free performance.

1. SAFETY

9  Aproperlyselectedfacemaskisessentialtoprotectyourhealth.Beforecommencinganytask,pleaseconsultwithqualiedsafety

 personneltoensurethatthefacemasktypeandratingo󰀨ersadequateprotectionforyourintendeduse.

8 DO NOTuseforreghting.TheserespiratorsDO NOT supply oxygen. DO NOTuseinoxygendecientatmospherese.g.tanksor

other poorly ventilated areas (see Limitations to use section).

8 DO NOT use in explosive atmospheres.

9  Foruseonlybytrainedandqualiedpersonnel.Requirementsforleaktightnessareunlikelytobeachievediftherespiratorisworn

against a beard or facial stubble.

9 When transporting this product, retain in the original packaging and keep away from mechanical and chemical hazards.

 WARNING! DEVICES MARKED “NR” SHALL NOT BE USED FOR MORE THAN ONE SHIFT.

2. INTRODUCTION

 PackofdisposablemasksclassFFP1/2/3NR(seeindividualpackaging).Protectsagainstnon-toxicdustsandwater-based 

 aerosols.FilterE󰀩ciency≥80%.ManufacturedtoBSEN149:2001+A1:2009. PLEASE REFER TO APPLICATIONS

TABLE OVERLEAF.

MODEL NO. FFP CLASSIFICATION

9329 FFP1NR

9309 FFP1NR

9331 FFP1NR

9304 FFP2NR

9305 FFP2NR

9332 FFP2NR

9333 FFP3NR

9334 FFP3NR

3. DIRECTIONS FOR USE

3.1. Fit the respirator and check leak tightness BEFORE entering the contaminated area.

3.2. Wear the respirator for the whole duration of the exposure to contaminants.

3.3.  UsetherespiratorinaccordancewithapplicableHealthandSafetyRegulations.

3.4. Discard the respirator and replace with a new one if:

 -therespiratorisremovedwhileinacontaminatedarea.

 -excessivecloggingoftherespiratorcausesbreathingdi󰀩cultyordiscomfort.

 -therespiratorbecomesdamaged.

 -(forrespiratorsprotectingagainstvapours;discardifthesmellofvapourspresentbecomesdetectable).

3.5. Leave the contaminated area if dizziness, irritation or other distress occurs.

3.6. Only for single use. No maintenance necessary. DO NOT store and/or reuse after single use.

3.7. Discard the respirator after single use (one shift maximum).

4. FITTING INSTRUCTIONS

NOTE: it is unlikely that the requirements for leakage will be achieved if facial hair passes under the face seal.

4.1. Cup the respirator in the hand, allowing the headbands to hang freely.

4.2. Hold the respirator under chin with nose piece facing outwards.

4.3. Place the lower headband around the neck below the ears. Holding the respirator against the face with one hand, place the top

headband above the ears, around the crown of the head.

4.4.  Respiratorswithadjustableheadbandsonly:whilemaintainingthepositionoftherespirator,adjusttensionbypullingtabofeach

 headband.(Tensionmaybedecreasedbypushingoutonthebackofthebuckle).

4.5.  Mouldthenoseareatotheshapeoftheface,runningthengertipsofbothhandsfromthetopofthenosepiecedownbothsides

whilst pressing inwards.

4.6. CHECK FOR LEAK TIGHTNESS AS FOLLOWS:

 -Placebothhandsovertherespiratorandexhalesharply,positivepressureshouldbeinsidetherespirator.Ifairisfeltescaping 

 aroundtheedgesreadjusttherespiratorbytighteningthenosepieceand/orincreasingthetensionoftheheadbands.

 -Repeattheprocedureuntilsatisfactoryfacethasbeenachieved.

IMPORTANT Inthecaseofrespiratorswithnonadjustableheadbandsiftheheadbandsaretooloosetensioncanbeincreasedby

tying a small knot in the headband.

g.1

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS &

CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO

MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR

FUTURE USE.

DisposablefacemasksIssue521/11/23

Original Language Version

5. STORAGE

5.1.  Keepunusedrespiratorsintheirclosedboxandstoreandtransportinadry,non-contaminatedarea   

 between-20+50°Catrelativehumiditybelow75%.

6. EXPIRY DATE

6.1. Period of obsolescence is 3 years from date of manufacture (refer to manufacturing and

expiry date on packaging.

7. LIMITATIONS TO USE

8 DO NOT use these respirators or enter/stay in an area where:

 -oxygenconcentrationislessthan19%.

 -contaminantsortheirconcentrationsareimmediatelydangeroustolifeorhealth.

 -particulateconcentrationsexceedlevelsxedbyapplicablehealthandsafetyregulationsorprotectionfactorxNPFwhicheveris

lower (Nominal protection factors 4.5 for FFP1, 12.5 for FFP2 and 50 for FFP3).

8. APPLICATIONS TABLE

Dust mask grade FFP1 FFP2 FFP3

Protection: Non-toxicdustand/orwaterbased

aerosols.

Minor dust level.

Mild toxic or irritant, solid & liquid

aerosols.

Moderate dust level.

Toxic liquids, solids & liquid

aerosols.

High dust level.

Application: Handling rubble, sweeping, drilling

concrete.

Plastering, sanding rust & soft

wood, grinding & cutting metal,

paint spraying

(excluding2-packisocyanate)*

Paint stripping, sanding of

hardwood or cement, copper,

chromeorarsenic,welding*.

Substance: Flour, chalk, graphite, cotton,

concrete.

Untreated softwood, coal, powder

pesticide,breglass.

Biological, pharmaceutical,

chrome,lime,lead,asbestos(non-

handling).

Filter e󰀩ciency: ≥80% ≥94% ≥99%

*Theapplicationguideisgivenasanindicationonly.Beforecommencingwithanytask,pleaseconsultwithqualiedsafetypersonnel,

orcarryoutyourownriskassessment,toensurethatthefacemasktypeandratingo󰀨ersadequateprotectionforyourintendeduse.

Youmayneedtousethismaskinconjunctionwithothersafetyequipment.Theseareparticulateltersonly,anddonotprovide

protection from harmful fumes or gases.

9. APPROVAL

9.1.  OurdisposableparticulaterespiratorshavebeentestedandcerticatedbytheBSIGroupTheNetherlandB.V.NB2797,SayBuilding,

 JohnM.Keynesplein9,1066EPAmsterdam,TheNetherlandsforEUtypeExamination,orBSIAssuranceUKLtd.AB0086,Kitemark

 Court–DavyAvenue,Knowlhill,MiltonKeynes,MK58PPforUKCAconformtityassesment–UK.    

 Thelteringhalfmaskproducedtrue(EU)2016/425,standardsfromEN149:2001+A1:2009FFP1,FFP2andFFP3NR,UKCAand

CE marked.

DisposablefacemasksIssue521/11/23

Original Language Version

EU | Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68 Ireland

UK | Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

01284 757500 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycleunwantedmaterialsinsteadofdisposingofthemaswaste.Alltools,accessoriesandpackagingshouldbesorted,

taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product

becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and

dispose of the product and fluids according to local regulations.

Note:Itisourpolicytocontinuallyimproveproductsandassuchwereservetherighttoalterdata,specificationsandcomponentpartswithoutpriornotice.

Important: No Liability is accepted for incorrect use of this product.

Warranty:Guaranteeis12monthsfrompurchasedate,proofofwhichisrequiredforanyclaim.

PURCHASE HERE

This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective

Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.

Worksafe 9331/3 Valved Cup Mask FFP1 - Pack of 3

Product's Documents

Instructions Manual

Specifications

Worksafe 9331/3 Questions and Answers