Loading ...
Loading ...
Loading ...
06 07
Charging
Empty the Dust Container
Charging
Place the vacuum cleaner on the charging base, and plug the adapter in.
When charging, the blue LED indicators will flash. It takes 4-5 hours to fully
charge the vacuum cleaner.
When charging is finished the indicator turns blue and flashes for 10 seconds
then turns off.
The indicator turns off means it is fully charged and can be used.
The last blue LED flashes for 10s indicates that the vacuum cleaner
needs to be charged.
Empty the Dust Container
Press dust container release button to detach the dust container from
motor block.
Upward tilt the dust container to avoid dust spilling when removing the
dust container.
The dust container cannot be opened if no pressing the release button.
Please do not remove the dust container violently.
Remove the filter and pour out the dust as shows.
Once the dust reaches the “MAX” mark, empty it as soon as possible—do not
exceed the maximum capacity.
To prevent dust from blowing, please put the dust container into the dust bag
and carefully empty it.
Carefully remove the dust bag from the dust container and seal the dust bag
for routine handling.
To replace the filter unit, make sure that the dust cup and seal are com-
pletely dry.
Re-align the filter device to the correct position and put it back into the
dust container.
Close the dust container until you hear the “click” sound.
1.
3.
4.
2.
Max
Click
4-5H Flash
Blue Flash Blue Turn off
Loading ...
Loading ...
Loading ...