Loading ...
Loading ...
Loading ...
Shure Incorporated
16/23
Issue Indicator Status Solution
Transmitter indicator LED
flashing red
Replace transmitter batteries (see Changing Batteries).
Audio artifacts or dropouts Ready LED flickering or off
Change receiver and transmitter to a different group and/
or channel.
IdentifynearbysourcesofRFinterference,andshut
down or remove source.
Replace transmitter batteries.
Ensurethatreceiverandtransmitterarepositionedwith
in system parameters
System must be set up within recommended range and
receiver kept away from metallic surfaces.
Transmitter must be used in line of sight from receiver for
optimal sound
Distortion
AudioLEDonreceiverindi
cates overload (red)
Reduce transmitter gain (see Adjusting Gain).
Sound level variations when
switching to different
sources
N/A
Adjust transmitter gain as necessary (see Adjusting
Gain).
Receiver/transmitter won't
turn off
LED/display flashing rapidly See Locking and Unlocking Controls.
Frequency Range and Transmitter Output Level
Band Range Output Power
G18 470 to 494 MHz 10 mW
H8 518 to 542 MHz 10 mW
H8E 518 to 542 MHz 10 mW
H9 512 to 542 MHz 10 mW
H10 542 to 572 MHz 10 mW
H10E 542 to 572 MHz 10 mW
H11 572 to 596 MHz 10 mW
H62 518 to 530 MHz 10 mW
J10 584 to 608 MHz 10 mW
J11 596 to 616 MHz 10 mW
K3E 606 to 630 MHz 10 mW
Loading ...
Loading ...
Loading ...