Loading ...
Loading ...
Loading ...
To increase the heat setting for a selected zone, reduce the heat setting of another
cooking zone within the same Group. You will then be able to reselect the desired
cooking zone and increase its heat setting.
If the display flashes alternately with the heat
setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minute if no suitable pan is placed on
a cooking zone.
When you have finished cooking
1. Touch the heating zone selection control that you wish to
switch off.
2. Turn the cooking zone off by touching the “-” and scrolling down to “0”,Make
sure the power display shows “0”, then shows “H”.
and then
Loading ...
Loading ...
Loading ...