Loading ...
Loading ...
Loading ...
Installing Your N
Positioning:
Position the appliance
away from sou
of stoves, radiators,
direct sunlight etc.
Maximum performance and safety are
guaranteed by maintaining the correct
indoor temperature for the class of unit
concerned as specified on the rating plate.
This appliance performs well
ST. The appliance
may not work properly
if left at a temperature above or below the
indicated range.
Climate class
Ambient temperature
SN
+10°C to +32°C
N
+16°C to +32°C
ST
+16°C to +38°C
T
+16°C to +43°C
Appliance
must not be exposed
Sufficient air must be allowed to circulate
in the lower rear section of
poor air circulation can affect performance
Built-in appliance
should be positioned
away from heat sources such as stoves,
fires or heaters.
Installation instructions:
Before
installing, carefully read the
instruction in order to avoid a certain
number of problems.
This is
Dimensions of mounting slot
N
ew Appliance
away from sou
rces
direct sunlight etc.
Maximum performance and safety are
guaranteed by maintaining the correct
indoor temperature for the class of unit
concerned as specified on the rating plate.
This appliance performs well
from SN to
may not work properly
if left at a temperature above or below the
Ambient temperature
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
must not be exposed
to rain.
Sufficient air must be allowed to circulate
in the lower rear section of
appliance, as
poor air circulation can affect performance
.
should be positioned
away from heat sources such as stoves,
Installation instructions:
installing, carefully read the
instruction in order to avoid a certain
Dimensions of mounting slot
.
Follow the steps
in the
guide provided.
Note:
Your product is designed and built
for domestic household use only. The
product must
be correctly installed,
located and operated in accordance with
the instructions contained in
Instructions guide
provided.
Reversing the fridge
door
The side at which the door opens can be
changed, from the right side (as supplied) to
the left side, if the installation site requires.
Warning! When reversing the door,
appliance must not be connected to the
mains. Ensure
that the plug is removed
the mains socket..
Tools you will need(Not provided):
Philips Screwdriver &
Slotted Screwdriver
Wrench(
Note:
When required, tilt the refrigerator back
order to gain access to the base, you
should rest the
appliance
packaging or similar material to avoid
damaging the backboard of the
refrigerator. To reverse the door, the
following steps are generally
recommended.
1. Stand the refrigerator upright. Open the
door,
remove the upper hinge cover
and right).
Remove the lower screw hole
cover for the cabinet.
Remove the screw
hole cover for the door.
in the
installation
Your product is designed and built
for domestic household use only. The
be correctly installed,
located and operated in accordance with
the instructions contained in
the User
provided.
door
The side at which the door opens can be
changed, from the right side (as supplied) to
the left side, if the installation site requires.
Warning! When reversing the door,
the
appliance must not be connected to the
that the plug is removed
from
Tools you will need(Not provided):
Wrench(
8mm)
When required, tilt the refrigerator back
in
order to gain access to the base, you
appliance
on soft foam
packaging or similar material to avoid
damaging the backboard of the
refrigerator. To reverse the door, the
following steps are generally
1. Stand the refrigerator upright. Open the
remove the upper hinge cover
(left
Remove the lower screw hole
Remove the screw
6
Loading ...
Loading ...
Loading ...