Loading ...
Loading ...
Loading ...
24
ITEN
MAINTENANCE AND CLEANING
DESCALING
Limescale normally builds up with extended use of
the appliance; the machine needs descaling every 3-4
months and/or whenever a reduction in water flow is
noticed.
In the event of any operational conflict, this use and
maintenance manual shall prevail on any indication
specified on accessories and/or components sold sep-
arately.
For descaling can be used a descaling product for cof-
fee machines of non-toxic and/or harmful type, com-
mercially available.
Do not drink the descaling solution and products dis-
pensed until the completion of the cycle. Never use
vinegar as a descaling solution.
Remove and empty the water tank.
Refill the tank with a descaling solution and water as
specified on the package of the descaling product.
Refit the tank.
Power the machine ON and place a suitable container
under the spout.
Press the switch-on/supply button, then supply two
cups (approximately 150 ml each) of water.
Allow the descaling solution to work for about 15-20
minute.
Switch the machine on by pressing the switch-on/sup-
ply button, then proceed as described in steps and
.
Repeat the steps described in point until the water
tank is completely empty.
Remove the tank and rinse it with fresh drinking water.
Fill it completely.
Switch the machine on by pressing the switch-on/
supply button. Place a suitable container under the
dispenser. Press the switch-on/supply button, then
supply the full content of the tank.
When the water is finished, refill the tank and repeat
the steps described in point
. When finished, the
end of the descaling cycle is completed.
Loading ...
Loading ...
Loading ...