Loading ...
Loading ...
Loading ...
3
Pan Position
[0° to 360°]
Bracket
Adjusting Nut
Tilt Position
[0° to 90°]
Rotation Position
[0° to 360°]
Figure 2-3 3-Axis Adjustment
2.1.2 Ceiling/Wall Mounting with Junction Box
Before you start:
You need to purchase a junction box in advance.
Steps:
1. Paste the drill template (supplied) on the
ceiling/wall.
2. Drill screw holes and the cable hole on the ceiling
according to the drill template.
Figure 2-4 Drill Template of Junction Box
3. Take apart the junction box, and align the screw
holes of the camera with those on the junction
box’s cover.
4. Attach the camera on the junction box’s cover with
three PM4 × 10 screws.
Figure 2-5 Attach Camera on Junction Box’s Cover
5. Secure the junction box’s body on the ceiling/wall
with three PA 4 × 25 screws.
Junction Box
Body
Figure 2-6 Secure Junction Box on Wall/Ceiling
6. Route the cables through the bottom cable hole, or
the side cable hole of the junction box.
7. Combine the junction box cover with its body.
Loading ...
Loading ...
Loading ...