Loading ...
Loading ...
Loading ...
13
A - Standby generator enclosure
B - Mounting holes in generator base
C - Fuel inlet location
D - Entrance stub-up area
D1 x D2 - Entrance stub-up location
E - Exhaust outlet area reference
F - Concrete slab reference
Lifting the Generator
Proper tools, equipment, and qualified personnel should be
used in all phases of handling and moving the generator.
The approximate weight of the generator is listed in the
Generator Specifications Section.
Use the 3" diameter lifting holes (G) in the base of the
generator to lift the generator onto the concrete pad. Lift
the generator in accordance with OSHA or local lifting
regulations. Retouch any chipped paint with supplied touch-
up paint.
Attach the generator to the slab at the four corner locations
(B) with masonry anchors as required by local code.
G
B
D
C
E
A
B
F
F
D2
D
D1
D
C
B
WARNING
Hazardous Voltage - Contact with power lines
could cause electric shock or burns, resulting in death or
serious injury.
• If lifting or hoisting equipment is used, DO NOT
contact any power lines.
• DO NOT lift or move generator without assistance.
• DO NOT lift unit by roof as damage to generator
will occur.
Not for
Reproduction
Loading ...
Loading ...
Loading ...