Hikvision DS-2DE5425IW-AES6 User Manual

Loading ...

Wait to Stop Tracking If Low Validity

The validity is an internal parameter that helps judge whether the device should keep

tracking or not. This parameter is the waing me level before the device stops tracking

when the validity is low. Larger value means longer waing me.

Wait to Lower Tracking Speed If Low Validity

The validity is an internal parameter that helps judge whether the PTZ channel should lower

the tracking speed or not. This parameter is the waing me level before the device lowers

the tracking speed when the validity is low. Larger value means longer waing me.

Oponal: Check Tuning Mode.

Note

Tuning mode is to display the informaon that helps debugging the funcon. This mode is

reserved for technical support.

Click Save.

3.11 Set Power O Memory

This funcon can resume the previous PTZ status of device aer it restarng from a power-o.

Steps

Go to Conguraon → PTZ → Basic Sengs .

Select Resume Time Point. When the device stays at one posion for the set resume me point

or more, the posion is saved as a momory point. The device returns to the last memory point

when it restarts.

Click Save.

3.12 Set PTZ Priority

The funcon can set the PTZ priority of dierent signals.

Steps

Go to Conguraon → PTZ → Priorize PTZ .

Set the priority signal and delayed me.

Network

The network signal controls the device with priority.

RS-485

The RS-485 signal controls the device with priority.

Delay

It refers to the me interval of PTZ operaon controlled by dierent signals. When the

operaon with high priority is nished, the low priority signal controls the device aer the

seng interval.

Network Speed Dome User Manual

Loading ...

Hikvision DS-2DE5425IW-AES6 4 MP 25X Powered by DarkFighter IR Network Speed Dome