Hikvision DS-K1T341CM User Manual

Loading ...

Chapter 4 Wiring

You can connect the RS-485 terminal with the RS-485 card reader, connect the NC and COM

terminal with the door lock, connect the SENSOR terminal with the door contact, the BTN/GND

terminal with the exit buon, and connect the Wiegand terminal with the Wiegand card reader or

the access controller.

If connect the WIEGAND terminal with the access controller, the face recognion terminal can

transmit the authencaon informaon to the access controller and the access controller can

judge whether to open the door or not.

Note

If the cable size is 18 AWG, the distance between the power supply and the device should be no

more than 60 m when wiring a single device. And the door lock and the other peripherals should

connect to a 12 VDC external power supply. If connecng to a 12 VDC door lock, the distance

between the power supply and the device should be 30 m.

4.1 Terminal Descripon

The terminals contains power input, RS-485, Wiegand output, and door lock.

The descripons of the terminals are as follows:

Table 4-1 Terminal Descripons

Group No. Funcon Color Name Descripon

Group A A1 Power Input Red +12 V 12 VDC Power

Supply

A2 Black GND Ground

Group B B1 RS-485 Yellow 485+ RS-485 Wiring

B2 Blue 485-

B3 Red/Black GND Ground

Group C C1 Wiegand Green W0 Wiegand

Wiring 0

C2 White W1 Wiegand

Wiring 1

C3 White/Black GND Ground

Group D D1 Door Lock White/Purple NC Lock Wiring

(NC)

DS-K1T341C Series Face Recognion Terminal User Manual

Loading ...

Hikvision DS-K1T341CM Value Series Face Access Terminal