Loading ...
Loading ...
Loading ...
34 - INSTALLATION 91477B180/A
hob to avoid any accidental contact. It must
only be possible to remove the double-layer
base using suitable equipment.
Fastening to the built-in cabinet
It has to be secured to the cabinet using front
and back screws:
1. Remove the screws from the holes indicated
in the figure below.
2. Fasten the fixing brackets (A) into the holes
marked using the screws that were removed
in order to correctly fix the hob to the
structure.
The fixing brackets should be installed differently
according to the thickness of the countertop.
• Countertop thickness 30 mm:
• Countertop thickness 40 mm:
• Countertop thickness 50 mm:
Instructions for the installer
• If you use a plug (if present) to connect to
the power supply, the plug must be
accessible after installation.
• Do not bend or trap the power cable.
• The appliance must be installed according
1 Opens on bottom
2 Opens on back
Amin. 5mm
Bmin., 20mm
C min. 30 mm - max. 50 mm
D min. 30 mm - max. 50 mm
Failure to install the double-layer
wooden base exposes the user to
possible accidental contact with sharp
or hot parts.
If tightened too much the glass may be
strained and crack.
In the case of countertops of less than
30 mm, an additional spacer should be
used between the bracket and the top.
Loading ...