Loading ...
Loading ...
Loading ...
Remote Display True-rms Clamp Meter
Safety Information
3
• Examine the test leads for damaged insulation or exposed metal. Check test lead
continuity. Replace damaged test leads before using the Meter.
• Do not use the Meter if it operates incorrectly. Protection can be compromised.
When in doubt, have the Meter serviced.
• Do not use the Meter around explosive gas, vapor or in damp or wet
environments.
• Use only type AAA batteries, properly installed in the Meter case, to power the
Meter.
• To avoid false readings that can lead to electrical shock and injury, replace the
batteries as soon as the low battery indicator (B or Q)
appears.
• When servicing the Meter, use only specified replacement parts. See Table 5.
• Have the Meter serviced only by qualified service personnel.
• Be careful around voltages > 30 V ac rms, 42 V ac peak, or 60 V dc. Such
voltages pose a shock hazard.
• Do not apply more than the rated voltage, as marked on the Meter, between the
terminals or between any terminal and earth ground.
• When using the probes, keep fingers behind the finger guards on the probes.
• Connect the common test lead before connecting the live test lead. When
disconnecting test leads, disconnect the live test lead first.
• Do not work alone so assistance can be rendered in an emergency.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...